Xiang'an Industrial Park Xiamen Torch High-tech Zone
Industry News
Hatro LZ619 Custom Flat Component Carrier Tape | 12mm Black PC Packaging Solution for 010 Ultra-Thin SMD Chips
LZ619 is a wide-format carrier tape specially engineered for ultra-flat 010 size miniature electronic components. Conventional deep-cavity carrier tapes cause thin flat chips to sink too far inside the pocket, leading to frequent nozzle pick failure and production downtime. To solve this long-standing industry pain point, Hatro designs an ultra-shallow 0.60mm pocket that keeps 010 parts nearly flush with the tape surface, ensuring stable pickup in continuous high-speed assembly lines.
The 0.20mm thin PC base maintains good flexibility without permanent curling after multi-layer reel winding. The 0.50° small demolding angle reduces mold sticking during mass forming, improving production yield. The long narrow cavity (A0=1.20mm, B0=4.05mm) perfectly matches the strip-shaped outline of 010 components, limiting left-right and front-back sliding to avoid component tilting. The black opaque PC material delivers basic light-shielding performance to protect photosensitive miniature chips from light aging during long-term storage. All dimensions strictly comply with EIA-481 international carrier tape standards, fully compatible with mainstream 12mm taping and SMT placement machines worldwide.
Core Specifications (EIA-481 Standard)
| Parameter | Standard Tolerance (mm) | LZ619 Value (mm) | Practical Industrial Benefit |
|---|---|---|---|
| W Tape Width | 12±0.10 | 12 | Universal wide width fits all global 12mm automated taping equipment, no equipment modification needed |
| P1 Feed Pitch | 4±0.10 | 4 | Standard sprocket pitch ensures stable traction, eliminates tape jumping and jamming in non-stop mass production |
| T Base Thickness | 0.20±0.02 | 0.20 | Thin flexible substrate resists winding deformation, keeps tape flat after thousands of reel layers |
| A0 Cavity Width | 1.20±0.05 | 1.20 | Narrow pocket width restricts lateral movement of slim 010 flat chips |
| B0 Cavity Length | 4.05±0.05 | 4.05 | Elongated cavity fully wraps the long strip-shaped outline of 010 components |
| K0 Cavity Depth | 0.60±0.05 | 0.60 | Ultra-shallow pocket prevents thin chips from sinking, drastically lowering empty pick rate in SMT processes |
| D1 Draft Angle | 0.50 | 0.50 | Gentle demolding angle reduces material adhesion on molds, improves continuous forming efficiency |
Core Advantages
Ultra-Shallow 0.60mm Exclusive Pocket: Solves the common empty pick problem of ultra-flat 010 components, greatly boosting SMT production uptime.
Long Narrow Cavity Design: Precisely fits slim strip-shaped 010 chips, limiting component shaking and tilting during transportation and taping.
0.20mm Flexible Thin PC Base: Balances flexibility and flatness, no curling after long-term reel stacking and cross-border logistics.
Low-Stick 0.50° Demolding Angle: Optimized mold angle reduces sticking defects during high-volume carrier tape production.
One-Stop Supporting Accessories: Matching anti-static cover tape and standard plastic reels are available together, fast custom mold adjustment for variant 010 part sizes.
Application Scenarios
010-size flat miniature resistors, capacitors, diodes for consumer electronics, wearable devices, and IoT modules
High-speed SMT production lines with strict requirements on low empty pick rates
Component packaging factories with long-term mass orders for ultra-thin flat SMD chips
Q&A
Q: Why design such a shallow 0.60mm pocket for 010 flat components?A: 010 chips are ultra-thin flat parts. Deep pockets make the component sink deep inside the cavity, so the suction nozzle cannot fully touch the chip surface, causing repeated pick failures. The ultra-shallow pocket keeps the part close to the tape surface to ensure stable pickup every cycle.Q: What is the advantage of the 0.50° small demolding angle?A: Gentle draft angle reduces the friction between raw material and mold walls during thermoforming, lowering the rate of mold sticking and blemishes on pocket inner walls, which helps maintain consistent quality in 24-hour continuous mass production.
Diam luctus nostra dapibus varius et semper semper
rutrum ad risus
eros. Cursus libero viverra tempus netus diam vestibulum
GET FREE QUOTE
Please contact us.